Lallisa 2-Piece Stainless Steel Shower Shelf Review: Drilling and Wall Fit

As an Amazon Associate we earn from qualifying purchases. Details

If you are considering the Lallisa stainless steel shower shelves, the first question is whether your wall can take screws and plastic anchors without cracking the tile or hitting pipes behind it. These shelves need holes drilled into the wall, so the wall is part of the purchase decision. This review covers only what the listing states about the stainless build, size, weight, drilling and included hardware, care and waterproofing claims. It does not report any test of the shelves on a wall, and it does not give a load figure the listing does not state. Use the listing to decide whether the shelves suit your wall, and check the wall before you drill.

Quick answer

The Lallisa set is two silver stainless steel floating shelves with guard rails, mounted to the wall with screws and anchors. The bullets say the metal is 304 stainless steel, polished and brushed, and describe it as corrosion, scratch and rust resistant and waterproof. The product dimensions give 16.54 inches deep, 9.45 inches wide and 2.95 inches high, while the size field gives 15.75 inches. The item weighs 4.1 pounds for the set. The included hardware is four screws, four plastic anchors, four hidden covers and four nuts, and the bullets say you need to drill and bring your own screwdriver. The listing states no load limit and no warranty term.

What to check in a wall-mounted shower shelf

Four details decide whether these shelves fit. Each one can rule it in or out.

1. Size and door width. The product dimensions give 16.54 inches deep, 9.45 inches wide and 2.95 inches high. The item dimensions field gives 15.75 by 2.28 by 3.94 inches, and the item depth field gives 2.28 inches. The size field gives 15.75 inches, and the minimum door width is also 15.75 inches. These figures disagree on depth, so measure the wall space and the height you need before you drill.

2. Load and weight. The specs give an item weight of 4.1 pounds for the two-piece set. The listing does not give a load limit for either shelf. The bullets mention guard rails that keep items from falling or tilting, but they do not give a weight rating. Keep the load light, and do not treat the shelf as rated for a heavy bottle collection.

3. Wall and drilling. The bullets say you need to drill the holes first, then drive in the plastic expansion strips and screw in the screws with a screwdriver, which is not included. The listing does not say which wall types the anchors suit. Check the wall material before you drill. A plaster or drywall wall needs a different fixing from a solid wall, and a stud finder helps you locate framing. The stud finder page on Wikipedia describes magnetic models that detect metal fasteners and electronic models that detect density changes. Avoid drilling into a pipe or cable, and check behind the wall first.

4. Material and care. The bullets say 304 stainless steel, polished and brushed, corrosion resistant and waterproof and moisture proof. The specs list the special feature as waterproof and the care field as wipe with a dry cloth. The bullets include a note about the shelf edges, which the listing cuts off in the data, so check the product page for the full wording and handle the edges with care during install.

Use these rules to choose:

• Choose these shelves if your wall is solid enough for drilled screws and anchors, and your bathroom needs a stainless shelf for light bottles.
• Choose a different shelf if you need a stated load figure, because the listing gives none.
• Choose a different shelf if you need a warranty, because the listing gives none.

For other stainless shower storage options, the best stainless steel shower caddy rust proof guide covers caddies, and the best stainless steel wall mounted shower caddy guide covers wall-mounted designs.

The Lallisa stainless steel shelves

The shelves are contemporary, rectangular, backless floating shelves in silver stainless steel. The listing names the room types as bathroom, kitchen and living room, and the specific use as shower caddy. The shelf bracket shape is straight, and the set is two pieces. The model number is YIU-Lallisa-101 and the manufacturer is Lallisa. The included components field names hardware.

The shelves fit a reader who wants a light stainless caddy for shampoo, soap and bottles, and who will drill into a wall that can take the anchors. The bullets describe the shelves as useful beyond the bathroom, in a kitchen or bedroom, which is the maker’s list of uses.

The listing has several things to check. The dimensions and depth fields disagree, as noted above. The shelf thickness is 2.28 inches, which does not describe a typical shelf and needs checking. The listing gives a set weight of 4.1 pounds and no per-shelf figure. The bullets say the anchors are plastic expansion strips, and the listing does not say which wall types they suit. The model label field in the listing uses odd text, so use the model number when you check the product.

Who should skip it: a reader whose wall cannot take drilled screws and plastic anchors, a reader who needs a stated load for each shelf, and a reader who needs a stated warranty.

Drilling and the wall

The bullets say you need to drill first, then install the anchors, then screw in the shelves, with a screwdriver you supply. Mark the holes with the shelf in place, and check that the holes miss the grout lines and any pipe or cable behind the wall. The listing does not describe the tools for a tile wall, so use drill bits that suit your wall material and follow the included installation accessories.

Stainless steel does not stop a wall fixing from failing, so keep the load light. The Wikipedia overview of drywall says drywall is a gypsum panel used in interior walls and ceilings, so a screw in drywall needs a fixing that suits gypsum, and a stud gives a firmer hold.

Worked example: how 3 pounds of bottles sit below the 4.1-pound set weight

Compare that load with the set’s own listed weight, so you can see how the load and the shelf compare in weight.

• Set weight: 4.1 pounds, from the specs.
• Load in this example: 3 pounds.
• Difference between the set and the load: 4.1 minus 3 = 1.1 pounds.

Check the arithmetic again. 4.1 minus 3 is 1.1. The example shows that the bottles weigh less than the set itself. The listing gives no load limit, so this comparison is not a rating. Keep the load light and spread it across both shelves.

Why stainless resists rust

The bullets describe 304 stainless steel. The Wikipedia overview of stainless steel says it is an iron-based alloy with chromium, which makes it resistant to rust and corrosion. The resistance comes from a chromium content of at least 10.5 percent, which forms a passive film that protects the metal. A scratch through the finish is the place to check first, because the film protects only the surface it covers.

What the plastic anchors do

The bullets say you drill, then drive in plastic expansion strips and screw the shelf on. The Wikipedia overview of wall plugs describes them as fibre or plastic inserts that let a screw attach to a porous or brittle material, or to one that would not otherwise hold the screw. The listing does not say which wall the strips suit, so use them only where the wall is solid enough to hold the screw, and check the screw length against the strip.

Five common mistakes

1. Drilling without checking behind the wall. Check for pipes and cables first.
2. Trusting one depth. The product dimensions give 16.54 inches, and the item depth field gives 2.28 inches.
3. Assuming a load rating. The listing gives none.
4. Using the wrong anchor for the wall. The listing does not say which walls the plastic anchors suit.
5. Handling the edges carelessly. The bullets say the cut edges may be sharp.

FAQ

What material is it?

The bullets say 304 stainless steel, polished and brushed.

How big is it?

The product dimensions give 16.54 inches deep, 9.45 inches wide and 2.95 inches high, and the size field gives 15.75 inches.

How much does it weigh?

The specs give 4.1 pounds for the two-piece set.

How is it mounted?

The bullets say drill first, then use plastic expansion anchors and screws. A screwdriver is not included.

What load does it hold?

The listing states no load limit.

Does it come with a warranty?

The listing states no warranty term.

Bottom line

The Lallisa stainless steel shelves suit a reader who wants two light stainless shelves for bathroom bottles, mounted with drilled screws and plastic anchors on a wall that can take them. The listing gives 304 stainless steel and a 4.1-pound set weight, but it conflicts on depth, gives no load limit and no warranty term, and does not say which walls the anchors suit. Check your wall and what is behind it, measure the space, and keep the load light.

Sources

• Drywall, Wikipedia: a gypsum panel used in interior walls and ceilings.
• Stud finder, Wikipedia: magnetic models detect metal fasteners; electronic models detect changes in wall density.
• Stainless steel, Wikipedia: chromium content of 10.5 percent or more forms a passive film that protects against rust and corrosion.
• Wall plug, Wikipedia: a fibre or plastic insert that lets a screw attach to a porous or brittle material.