best-moen-home-care-bathroom-safety-24-inch

As an Amazon Associate we earn from qualifying purchases.

If you are looking at the best Moen home care bathroom safety 24 inch grab bars, the first thing to know is that only one of the five listings in our scan carries the Moen name in its title, and that listing’s brand field reads Geweo. The other four come from other brands. This guide covers all five 24-inch listings, what each listing states, and what the manufacturer and university sources say about mounting. It does not claim that any bar prevents falls, meets a standard, or holds a particular load.

Quick answer

• Only one of the five listings names Moen in its title. Its brand field says Geweo, and its manufacturer field says Moen Incorporated. Confirm the maker on the exact product you plan to buy.
• All five listings give a 24-inch length in their titles or specs. One listing’s dimension field gives 12 inches by 3 inches instead, so measure your wall before you order.
• The sources in this post say grab bars should be screwed into wood studs, not into drywall alone, and that you should follow the maker’s instructions for the bar you buy.
• No source we opened states a rated load for any bar in this list, so this post gives no load figure. Check the rated load in the manufacturer’s document.

If you are comparing grab bars from other brands as well, the TAILI and Ravinte Hardware bath and shower grab bars comparison covers one pair of listings, and the Ravinte Hardware vs Islafeliz and Ravinte Hardware vs Gotega comparisons cover two more. None of those posts covers the bars in this one.

How we chose

The scan file for this query lists 48 results under “searched” and keeps five listings, all of which are titled for a 24-inch bar. We did not rank them. We read each listing for the same set of details: the brand and manufacturer fields, the material, the mounting hardware the listing says is included, the finish, the model number, and any dimension detail. Where two fields inside one listing disagree, we say so instead of picking the one that sounds better.

Listing text is used only for product details such as material, size, finish, model number and included parts. We did not take any mounting method, safety claim or standards claim from a listing. For mounting and safety, this post relies on the sources listed at the end of this page.

Several listings include bullet points that describe fall prevention, standards compliance or load figures. This post does not repeat those claims, because the sources opened for this post do not confirm them for these products.

The scan file is a snapshot. It records the listing data as read on 2026-10-23. Listings change, so the details on the product page are the ones that apply when you buy. This post covers grab bars only. If you need a hand-held shower head for an older adult instead, see Best Hand Held Shower Head for Seniors.

Mounting: what the sources say

Four organizations are cited for mounting advice: Moen, which is the maker and supplies four instruction sheets; Oklahoma State University Extension; UF Health, which is the University of Florida’s health system; and the National Institute on Aging. Their advice lines up on the main point, which is to fix the bar into wood studs. They differ on one detail, covered below.

Moen’s instruction sheets

Moen’s instruction sheet for an exposed-screw Home Care grab bar says that “screws must be mounted into a wood stud for secure installation.” The same sheet says that “Studs are usually 16″ apart,” and it directs the installer to drill 1/8″ pilot holes at each screw location. It also says that diagonal or angled installation is possible only with grab bars 24″ or longer. The tools it lists include a Phillips screwdriver and a stud finder, and its hardware list includes six stainless steel #10 x 2-inch screws.

Moen’s sheet for its Banbury-series bar tells the installer to decide between horizontal, vertical or angled placement, “remembering that BOTH ends of the grab bar MUST be positioned over a wood stud.” The same sheet says that, for horizontal mounting, both flanges typically will not reach two studs, so at least one flange may need Moen’s SecureMount anchors to hold it off the stud securely.

Moen’s SecureMount instruction sheet describes its flange design as allowing “secure connection with three screws into the wood stud at any angle.” That sentence describes the SecureMount design in that sheet. It does not say that every bar in this post uses that design.

For installation help or missing parts, Moen’s sheets say “PLEASE CONTACT MOEN FIRST” and list 1-800-BUY-MOEN (1-800-289-6636) for the United States. Use that number if the parts in your box do not match the listing or the sheet.

University and federal guidance

Oklahoma State University Extension’s 2022 article on aging in place says that, when you install grab bars, you should “make sure they are screwed into wall studs, not just drywall.” The same article says to “install grab bars in high-risk areas where a slip or fall is more likely.” That is the article’s advice on where to put bars. It is not a statement about how any product performs.

UF Health’s bathroom safety care sheet says “Do not use towel racks as grab bars.” It also says that grab bars “should be secured vertically or horizontally to the wall, not diagonally.” That second line disagrees with Moen’s allowance for diagonal mounting on bars 24 inches or longer. The two sources speak to different products and audiences, and this post does not settle the disagreement. For a specific bar, follow the maker’s sheet for that bar.

The National Institute on Aging’s room-by-room page on preventing falls at home says to “Mount grab bars near toilets and on both the inside and outside of your tub and shower.” It is a general guide and does not name a product.

What to do before you drill

These steps follow the shape of the Moen sheets. Read the sheet for the exact bar you bought before you start, because the sheets differ by model and some use different steps for different designs.

• Lay the bar against the wall where you want it and decide whether it will run horizontally, vertically or at an angle. If the sheet limits angled placement to bars of a certain length, check that limit against your bar.
• Find the studs with a stud finder and mark their centers. Moen’s sheets say studs are usually 16 inches apart, but your wall may differ, so measure it rather than assume.
• Use a level to check the bar’s position before you mark the screw holes.
• Drill the pilot holes the sheet specifies. Moen’s exposed-screw sheet says 1/8-inch holes at each screw location.
• Fix the bar with the screws the sheet names. If the sheet calls for anchors, use the anchors it names and nothing else.
• Confirm that the screws reach a stud at each point the sheet requires. If a flange sits over drywall with no stud behind it, the sheet’s own rules decide what happens next, and this post does not guess.
• Check the rated load in the manufacturer’s document and do not put more weight on the bar than that document allows.

Do not mount a grab bar on a towel rack or other fixture that the sources do not describe as a grab bar. UF Health’s care sheet is direct about towel racks.

The five listings

Each section below lists only the details the listing data states, with the points where the listing disagrees with itself marked.

Moen-titled listing (ASIN B001EI0TJ4)

This is the only listing whose title names Moen. The title describes a 24-inch stainless steel bar with concealed screws, a polished brass finish and model number R8924P. The brand field reads Geweo, while the manufacturer field reads Moen Incorporated, so the maker is not the same in every field. The specs list a finish type of stamped and a color of peened, and they give a weight of 0.79 kg. The bullet points describe a 1.5-inch diameter and a peened grip texture. The included components are listed as a grab bar, installation instructions and mounting hardware. The bullets say the SecureMount option is sold separately. The dimension field gives 12 inches by 3 inches, which does not match the 24-inch title.

Skip this one if the brand field matters to you and you cannot confirm the maker from the box or the sheet. It is also a poor choice if you plan to use the SecureMount option and need it included. The sources in this post do not confirm that model R8924P matches any Moen instruction sheet we opened.

View on Amazon

HZXFG two-pack (ASIN B0DH7Z33DF)

This is a two-bar pack of 24-inch stainless steel bars. The bullets describe SUS 304 stainless steel, a 1-inch rod diameter, a knurled grip section in the middle, and a concealed screw design with 1.8-inch lengthened screws. The item count is two. The product dimensions field gives 24 inches by 0.99 inches. The model number field reads “grab barS,” which is the listing’s own text. The included components field says “Shower Grab Bars” and does not name screws, although the bullets describe screws. The listing also suggests uses beyond bathtubs and showers, such as stairways. Those uses are not covered by any source opened for this post.

Skip this one if you need the package contents confirmed in writing before you buy, since the included list does not name screws. The sources in this post do not cover the mounting method for this bar.

View on Amazon

XIANTHUS brushed nickel bar (ASIN B0GYD7C18H)

This brushed nickel bar is listed at 24 inches long. The bullets describe a 1.25-inch diameter, 304 stainless steel and a textured grip. The dimension field gives 2 inches wide, which is a different measure from the diameter. The model number is XT-Safety Bar-60CM-SG-1P, and that model string uses a metric length that does not match the 24-inch title. The bullets describe 4-centimeter screws, concealed screw heads and optional sizes of 12, 16, 20, 24, 32 and 36 inches, and they list a 1-year product support statement. The included components field is hard to read and names several items that do not clearly describe a single bar, so do not rely on it for what is in the box.

Skip this one if you need the included parts confirmed, or if the model number has to match the 24-inch title. The sources in this post do not cover the finish durability of this bar.

View on Amazon

ProHeal chrome knurled bar (ASIN B0DQXDKL4H)

This chrome bar is listed at 24 inches long with a 1.5-inch dimension field. The bullets say the bar has a knurled surface, mounts horizontally or vertically, and sits 1.5 inches from the wall. The item weighs 1.36 kg according to the specs, and the material is metal. The listed sizes are 12, 16, 18, 24 and 32 inches. The included components field lists a knurled grab bar and screws, and the bullets say each bar includes all mounting equipment. The model number is PH-16288H.

The bullets also say the bar meets ADA and CSA guidelines. None of the sources opened for this post confirms that for this bar, so this post does not repeat the claim. If you need a bar that a standards body or a manufacturer document confirms for a specific standard, this listing does not show that.

Skip this one if you need the standards statement confirmed, or if you need a bar whose wall clearance is stated in a manufacturer document rather than in the listing bullets.

View on Amazon

supregear black two-pack (ASIN B0C3VJ9F8M)

This is a two-pack of 24-inch bars with a black painted stainless steel finish. The title and dimension fields give a 1-inch width, and the model number is GrabBar-2PK-HI-24in. The bullets describe a painted surface that the listing says improves grip. The bullets also say the box includes two bars, 16 screws, 12 expansion screws and an instruction manual. Another bullet in the same listing says the basic mounting hardware is not included. The included components field reads “No.” These statements do not agree with one another, so check the box contents before you decide. The bullets describe a 1-month return window and a 1-year limited warranty.

Skip this one if you need a clear list of what is in the box before buying, because the listing contradicts itself on the hardware. The sources in this post do not cover expansion screws or anchors for this bar.

View on Amazon

What we could not verify: what the sources do not say

• No source we opened states a rated load for any of the five listings. Some Moen instruction sheets state load figures for their own products. We could not match any of those figures to a listing in this post, so none is repeated here.
• No source we opened confirms which Moen instruction sheet matches model R8924P, or whether any Moen sheet applies to the other four listings.
• No source we opened confirms ADA, CSA or any other standard for these bars. The listing bullets make standards statements, and this post does not carry them forward.
• No source we opened covers finish durability, corrosion performance or warranty terms beyond what the listings state.
• No source we opened covers suction-cup bars, so this post makes no claim about them.
• The listings disagree with themselves on dimensions and included parts, as described in each section above.
• The sources do not say how a grab bar should be placed for a particular person’s needs. Placement advice here is general, and it is not medical advice.

FAQ

Is a 24-inch bar the right length for me?

The sources opened for this post do not give a length rule. Measure the wall space where the bar will go, and check the spot against the stud locations you find. Moen’s exposed-screw sheet says that diagonal or angled installation is possible only with bars 24 inches or longer, so length can affect how the bar may be angled on the wall.

Can I mount a grab bar into drywall only?

The sources in this post say no. Oklahoma State University Extension says to make sure bars are “screwed into wall studs, not just drywall.” Moen’s exposed-screw sheet says screws “must be mounted into a wood stud for secure installation.” If a stud does not line up with the spot you need, follow the maker’s sheet for that bar rather than improvising.

Can I use a suction-cup bar instead?

None of the sources opened for this post covers suction-cup bars, so this post makes no claim about them. The guidance this post does rely on describes screwed-in mounting into studs, and it does not describe suction cups as an alternative.

Where should grab bars go in a bathroom?

The National Institute on Aging’s page says to “Mount grab bars near toilets and on both the inside and outside of your tub and shower.” That is a general placement guide. Use it as a starting point and check the wall and the maker’s sheet for the exact spot.

How much weight can one of these bars hold?

This post cannot say. No source opened for it states a rated load for any listing here. Check the rated load in the manufacturer’s document for the exact bar you buy, and mount it the way that document directs. This is product and mounting information only, not medical advice.

Can I use a towel bar in place of a grab bar?

No, according to the UF Health care sheet. It says “Do not use towel racks as grab bars.” A towel rack is not designed as a grab bar, and the sources here do not describe one as a substitute.

Bottom line

Buy the bar whose maker instruction sheet you can read before you order, confirm the maker and the included parts on the listing, and fix it into wood studs in the way that sheet directs. Do not treat any bar in this list as having a rated load until the manufacturer’s document states one.

Sources

• Moen Incorporated, installation instructions for an exposed-screw grab bar, https://assets.moen.com/shared/docs/instruction-sheets/ins10349.pdf (opened 2026-10-23)
• Moen Incorporated, installation instructions for a Banbury-series grab bar, https://assets.moen.com/shared/docs/instruction-sheets/ins10780.pdf (opened 2026-10-23)
• Moen Incorporated, installation instructions for SecureMount grab bars, https://assets.moen.com/shared/docs/instruction-sheets/ins12875.pdf (opened 2026-10-23)
• Moen Incorporated, grab bar installation instructions with contact information, https://assets.moen.com/shared/docs/instruction-sheets/ins10757.pdf (opened 2026-10-23)
• Oklahoma State University Extension, “Aging in Place” (2022), https://extension.okstate.edu/articles/2022/aging-in-place.html (opened 2026-10-23)
• UF Health, “Bathroom safety for adults” care sheet, https://ufhealth.org/care-sheets/bathroom-safety-for-adults (opened 2026-10-23)
• National Institute on Aging, “Preventing Falls at Home: Room by Room,” https://www.nia.nih.gov/health/falls-and-falls-prevention/preventing-falls-home-room-room (opened 2026-10-23)