best-makefit-filtered-shower-head-black
As an Amazon Associate we earn from qualifying purchases.
If you are searching for the best makefit filtered shower head black, the MakeFit listing is a dual head with a built-in filter and a matte black color. This page covers that listing and eleven other black filtered shower heads that came up for the same search. For each one you will see the figures the listing states, the filter claims the maker makes, and where the sources we opened stop. No product here is ranked, because the sources do not give a basis for ranking filter performance.
Quick answer
- The MakeFit listing (ASIN B0DHKDX1ZR) is a dual head: an 8-inch rain head plus a handheld. Its bullets say the handheld has 10 modes, and its specification fields say 11 settings.
- The listing does not state a flow rate in gallons per minute (gpm). Of the 12 listings in this set, 7 state a usable gpm figure, and none names the WaterSense label.
- EPA says standard showerheads use 2.5 gpm and that WaterSense labeled showerheads use no more than 2.0 gpm. A listing that states 2.5 gpm is at the standard level, not the WaterSense level.
- Every filter claim below is the manufacturer’s claim. None of the three sources opened for this page gives performance data for any shower filter.
- A shower filter is not a water softener. Several listings use the words “hard water” or “softener” in their titles or bullets. This page does not repeat those words as a description of what the filters do.
How we chose
The 12 products are the listings returned for the search “makefit filtered shower head black” in the research file dated 2026-10-23. The MakeFit listing is the first entry in that file, and the other 11 are its neighbors in the same search. This is a search result, not a list of the best options, and the page does not say that any product is better than another.
Each product section uses only the title, bullets and specification fields stored for that listing. Marketplace metrics, badges, and seller details are not part of this page and are not used here. Where a figure appears, the section says the listing states it. Where the listing contradicts itself, both figures are shown.
Three non-Amazon sources were opened for the background sections: the EPA WaterSense showerhead page, a USGS water-resources report table on hardness, and a Penn State Extension page on water softening. Those three sources supply the flow-rate standards and the hardness and softening definitions used below.
What the flow numbers mean
Flow rate is the number most shoppers will compare first, and the EPA WaterSense showerhead page gives the baseline. It says, “Did you know that standard showerheads use 2.5 gallons of water per minute (gpm)?” It also says that water-saving showerheads that earn the WaterSense label “must demonstrate that they use no more than 2.0 gpm.”
The same EPA page describes two checks that WaterSense applies beyond flow. One is spray force, which the page describes as making sure the spray is sufficient for user satisfaction. The other is pressure compensation: the page says it “Ensures the showerhead will provide for a minimum flow across a range of household water pressures.” Those checks are described as part of the WaterSense program, not as a promise about every listing in this set.
In this set, the listed flow figures run from 1.75 gpm to 2.5 gpm. Two listings put 2.5 gpm in a style field rather than a flow field. The Nuodan listing also says its kit includes both a 2.5 gpm and a California-compliant 1.8 gpm flow restrictor. None of these figures is a WaterSense label, and none is described by its listing as WaterSense certified.
Hard water, softening, and what a filter is not
The USGS report table says that in most water “nearly all the hardness is due to calcium and magnesium.” Hardness is therefore a mineral question, and the table ties it to those two minerals.
Penn State Extension describes the process that removes those minerals. Its page says, “A water softener, also called an ion exchange unit,” works by filtering water through “an exchange media known as resin or zeolite.” That is a different mechanism from a cartridge of carbon or KDF media in a shower head. A shower filter is not a water softener, and nothing in the three sources opened for this page shows that a shower-head cartridge removes calcium or magnesium.
Penn State Extension also says, in its discussion of whole-home systems, that “Showers, sinks, and laundry hookups probably should be softened”. That is a point about whole-home softeners, and it is included here only to show where the sources draw the line. For shower filters, the listings are the only source of claims, and they are labeled below as the maker’s claims.
The 12 listings, product by product
Each section below lists the figures the listing states. Health, skin, and hair wording found in some listings is not repeated or assessed here, because the sources opened for this page do not address it. Each listing has a link to its Amazon page.
1. MakeFit dual filtered shower head, matte black (B0DHKDX1ZR)
The listing says the head has an 8-inch rain shower and a handheld shower with 10 modes, and its specification fields say 11 settings. It says the head is wall mounted, uses universal G½ inch threads, and comes with two adhesive shower-arm holders. The body is ABS. The color field reads Matte Black, while the finish field reads Polished. Both are shown here as the listing states them.
For the filter, the listing names KDF-55, calcium sulfite, vitamin C, and ceramic balls as media. It says the filter can handle up to 50,000 L (13,208 gallons) and should be replaced every three to five months, depending on tap water. It also says a filter change takes less than a minute. The claim that the filter reduces chlorine, heavy metals, rust, and sediment is the manufacturer’s claim. The listing does not state a flow rate in gpm, and no source opened here confirms the filter’s performance.
2. HammerHead Metal Filtered Shower Head, matte black (B0FPF2JLGW)
This is a metal head, and the listing gives its material as 304 stainless steel with lead-free brass. The model number is 6-GILLIAN-MB-2.5, and the style field reads 2.5 GPM. The item is listed at 6 inches long and 5 inches wide, weighs 3.5 pounds, and carries a limited lifetime warranty. The listing says it includes thread tape, a wrench, and an installation manual. It describes a 6-inch rainfall design.
The listing says the filter is a genuine KDF-55 system and that an independent check under NSF/ANSI 177 supports its chlorine claim. The NSF pages were not available to this page, so that claim is not verified here. The listing’s filter wording is the manufacturer’s claim.
3. Cobbe filtered shower head with handheld, black (B0G6Z4S4L7)
The listing gives a flow rate of 1.8 gallons per minute and lists the included parts as the shower head, an extension arm, and a hose. The head is metal and alloy, painted black, and its item dimensions are 11.22 by 5.31 inches. The listing names five spray modes: rain, massage, mist, water-saving, and power wash.
The listing says the filter uses more than 50 percent KDF-55 and calcium sulfite balls, and that it has a 20-stage filtration system. It makes claims about chlorine and heavy metals and says its filter lasts longer than some other filters. Those are the maker’s claims. The listing also says the head saves up to 35 percent of water; the sources opened here do not cover water-saving performance, so that figure is reported as the listing’s own.
4. WCQQ 360-degree black shower head and filter combo (B0FT3XHCV7)
The model is WQ-1127. The specification fields say the finish is brushed and the color is black, while a bullet describes a chrome finish. Both are shown as the listing states them. The item is listed at 6.18 by 6.26 inches, and the included parts are the shower head and a shower head filter. The listing says the package includes plumber’s tape and one filter, and it says the head is ABS.
The listing names seven spray patterns and a 25-stage filter. It says the filter lasts up to 90 days for a family of three, and it gives a lifetime head guarantee. It also says to let water run through the filter for three to five minutes before use. No flow figure in gpm appears in this listing. These filter lines are the manufacturer’s claims.
5. Fyhib filtered shower head with handheld, matte black (B0DGLRXYV9)
The model is CX-001. The listing gives a flow rate of 1.8 gallons per minute, a 60-inch hose, and a magnetic base. Its specification fields say 10 settings, while a bullet says 9 spray modes. The body is ABS, and the item is 11.02 by 5.12 inches. The included parts are the 60-inch hose, the handheld sprayer, the magnetic base, and raw tape.
The listing says the filter is a removable 10-layer system, and it describes the magnetic connection as a way to attach or detach the handheld with a simple snap. The filter performance wording is the manufacturer’s claim. The listing also says the head is high pressure, and the sources opened here do not confirm that a showerhead can raise pressure above what the home supply provides.
6. VXV 8-inch dual filtered shower head with handheld, matte black (B0DQBPSKCL)
The listing gives a flow rate of 1.75 GPM. The head is square, 8 by 8 inches, and the package includes a 12-inch adjustable extension arm, a 71-inch stainless steel hose, a 3-way diverter, and a self-adhesive holder for the handheld. The body is ABS with stainless steel parts. The listing names six settings on the handheld and rain, massage, rain and massage, bubble oxygenation, and water-saving modes.
The listing says the filter is a 20-stage system with KDF-55, activated carbon, VC balls, filtering beads, and mineral stone balls. It claims the filter removes chlorine, fluoride, heavy metals, and other contaminants. Those are the maker’s claims, and the sources opened here give no performance data for this or any filter. The listing says installation takes about five minutes without tools.
7. JOMSTHOME filtered shower head, black (B0GQHMXWNV)
The model is HS03A. The listing names three spray modes: a focused power jet, a gentle rain fall, and a balanced full spray. It is ABS, a bullet describes a chrome finish, and its item dimensions are 3.47 by 5.24 inches. The included parts are the shower head and a shower filter. The listing says it has a 25-stage filtration system and describes installation as tool-free.
The listing contradicts itself on one figure. The title says the filter removes 99.947 percent of chlorine and heavy metals, and a bullet says 99.945 percent. Both are claims in the listing, and the sources opened here do not cover removal rates. The listing also says the filter lasts up to six months or 12,000 gallons, and that an internal circulation system boosts water pressure by 30 percent. Those are the listing’s own claims. The listing does not state a flow rate in gpm.
8. Ryamen upgraded filtered shower head with handheld, matte black (B0D9GH4DBD)
The model is RMSH1115MB. The listing describes a 10-inch rain head with a height-adjustable slide bar, a 3-way diverter with a filter cartridge, a 7-setting handheld, and a 59-inch stainless steel hose. The item weighs 6 pounds. The style field reads 2.5 Gallons Per Minute, which the listing does not explain further.
The listing says the filter cartridge is built from KDF-55, calcium sulfite, carbon, VC, and stone balls, and it claims that the filter cuts chlorine and heavy metals. It also says the diverter button has passed 250,000 push tests. Those are the listing’s own statements; no source opened here confirms the filter or the button test. The listing says the head installs with a hex key and no plumber.
9. Hombeter high pressure filtered shower head with handheld, matte black (B0FNKGZVBT)
The model is SS1581MB. The listing describes a 10-inch rain head with filters and a height-adjustable bracket. The body is ABS and stainless steel, and the item measures 14.5 by 10 inches. The color field reads Premium Matte Black, while the finish field reads Polished. Each is kept as written in the listing. The included part is the shower head, and the bullets describe an extra-long stainless steel hose.
The listing’s item highlight says dual filtration removes chlorine. That is the manufacturer’s claim. No flow figure in gpm appears in this listing, and no certification for the filter is named. The thread is described as universal G½ inch.
10. Nuodan filtered shower head with handheld combo, matte black (B0DCF1V9RL)
The model is ND-822-BL. The listing gives the finish as bronze and the color as matte black; both are shown as stated. The head is 6 by 6 inches, and the hose is 59 inches. The kit includes a shower head with filter cartridge, a handheld, a holder, a 3-way diverter, a flow restrictor, Teflon tape, and a gasket.
The listing says the kit includes a 2.5 gpm flow restrictor and a California-compliant 1.8 gpm restrictor. It describes five handheld modes in a bullet, while the specification field reads three settings. The filter cartridge is described as KDF 55, alkaline ceramic balls, activated carbon, vitamin C, and calcium sulfite. The chlorine and heavy metal claims are the manufacturer’s claims. The listing also describes a two-stage pressurization technology, which the sources opened here do not cover.
11. BESAQUO 9-setting filtered shower head with handheld, matte black (B0GWFP4XMK)
The model is BES1469326. The listing gives nine settings, a built-in power wash, and a pause button that stops the water flow. The head is round, 10.5 by 5 inches, and made of premium ABS. The included parts are a 6-foot stainless steel hose, an adjustable brass ball-joint bracket, a flow restrictor, a handheld head, and Teflon tape. The listing gives a limited lifetime warranty.
The flow field reads 1.8 with no unit. The listing does not say whether that is gpm, so no flow rate is stated here. The listing says the filter is replaced every three months, or every two months in a hard water area, and that the change is tool-free and takes about two minutes. The filter performance statements are the manufacturer’s claims.
12. Jolie filtered showerhead, jet black (B0BMB6D9RD)
The model is SHWR-JB-850036402077. The listing gives a flow rate of 1.8 gallons per minute, five settings, and a rain setting type. The head is polyimide, 8 by 8 inches, and its color is listed as Jet Black. The item is wall mounted.
The listing says it is designed for standard U.S. shower pipes with a ½ inch NPT thread, and that it may not fit custom plumbing. It also says the filter replacement takes under 20 seconds. The listing makes clinical and dermatologist claims about hair and skin, and it says the filter exceeds NSF-177 certification. None of those health or certification claims is verified by the sources opened for this page, so they are not repeated here.
How to decide between these listings
Start with the fit. Several listings say they use a universal G½ inch thread, and the Jolie listing specifically describes ½ inch NPT. The three sources opened for this page do not cover thread sizes, so check your arm before you buy. For a comparison focused on the MakeFit model, see our post on Veken vs MakeFit handheld showerheads. For the parts question, see JDO vs MakeFit shower parts.
Next, read the flow figure as a number, not a promise. The WaterSense page gives 2.0 gpm as the ceiling for its label. Listings at 1.75 or 1.8 gpm are under that 2.0 gpm ceiling, but a flow figure alone does not make a showerhead WaterSense labeled, and no listing here names the label.
Last, treat the filter as a separate question. If chlorine is your concern, check whether the listing names a certifier and find that certifier’s own listing. For a broader view of what a shower filter can and cannot do, read Shower Filter or Whole-House Filter: What Each Does and Best Shower Filter For Hard Water.
What we could not verify: what the sources do not say
- None of the three sources opened for this page gives performance data for any shower filter, including chlorine, heavy metals, sediment, or any other contaminant. Every filter claim here is the maker’s claim.
- The MakeFit listing does not state a flow rate in gpm. The WCQQ, JOMSTHOME, and Hombeter listings do not state one either, and the BESAQUO flow field reads 1.8 with no unit.
- The NSF/ANSI 177 claims in the HammerHead and Jolie listings are not verified. The NSF pages returned an access block when opened for this page.
- Filter capacity, filter life, and replacement intervals are the manufacturers’ statements. The sources opened here do not cover them.
- Thread sizes are not covered by the sources opened here. The listings state G½ inch or ½ inch NPT, and fit should be checked against your shower arm.
- Several listings contradict themselves on color, finish, settings, or a removal rate. Those conflicts are shown where they appear and are not resolved.
- The health, skin, and hair claims in several listings, and the clinical claims in the Jolie listing, are not assessed on this page.
FAQ
Does the MakeFit listing state a flow rate?
No. The MakeFit listing, ASIN B0DHKDX1ZR, does not give a flow figure in its bullets or specification fields. Check the listing again before you buy if you need that number.
Is a shower filter the same as a water softener?
No. Penn State Extension describes a water softener as an ion exchange unit that uses resin. The listings in this set describe carbon, KDF, or similar media in a cartridge. Do not assume a shower filter softens your water.
What does 2.5 gpm mean?
EPA’s WaterSense page says standard showerheads use 2.5 gallons per minute. WaterSense labeled showerheads must use no more than 2.0 gpm. Two listings here put 2.5 gpm in a style field, so it describes the standard level, not the WaterSense level.
Does any listing here carry the WaterSense label?
None of the 12 listing texts in this set names the WaterSense label. If you want the label, look for it on the product or the manufacturer’s page, since the sources opened here cannot confirm it for any listing.
Can I confirm that a filter removes chlorine?
Not from these sources. Two listings name NSF/ANSI 177. That standard covers shower filter chlorine reduction, but the NSF pages were not available for this page. Ask the seller or manufacturer for the certifier’s listing and the certification number.
Which listing should I pick?
This page does not pick one. The sources do not give a basis for ranking filter performance, and the listings disagree with each other on several figures. Choose by fit, flow figure, and the parts you need, and check the filter claim against the certifier’s own record.
Bottom line
The MakeFit black filtered shower head is one of 12 listings from the same search, and its listing gives a dual head, a filter claim, and filter replacement details but no flow rate. The three sources opened here set the flow standard and explain hardness and softening. They do not show that any shower filter performs as its listing says. Confirm fit and flow before you buy, and treat every filter claim as the maker’s claim until a certifier’s record backs it up.
Sources
- EPA WaterSense, “Showerheads,” https://www.epa.gov/watersense/showerheads (opened 2026-10-27)
- USGS Water-Resources Investigations Report 02-4045, Table 3, “Source or cause, and significance of dissolved-mineral constituents and physical properties of water,” https://pubs.usgs.gov/wri/wri024045/htms/table3.htm (opened 2026-10-27)
- Penn State Extension, “Water Softening,” https://extension.psu.edu/water-softening (opened 2026-10-27)
